Product or Service
Outdoor Telecom Enclosure
Profile:Manufacturer - Producer|Ref:PSL185483YH | Country: China | Currency: usd | Export: No
ET4574 Outdoor Telecom Cabinet
The Outdoor Telecom Cabinet is small form, low profile outdoor telecom cabinet which is applicable for installation of 6U equipment.
Technical specification of the outdoor cabinet:
The outdoor cabinet is intended to be used as enclosure for one 1U, or 2U, or 3U, or 4U (depending on the RL type) indoor unit of the Radio Link and/or other telecommunication equipment.
The outdoor cabinet supports the following functions:
Standard 19” rack mountable option
6U space inside the cabinet for installing telecom equipment
4 Cooling (fans)
Heating system containing 1 Heater, 1 Heater Fan and thermostat
Support for mast installation
The outdoor cabinet has a connection for protective earth.
The outdoor cabinet has two mounting options:
To be mounted on the wall
To be mounted to a pole (mast) with a diameter of 50 – 120mm with adapters
Cable bushings (holes)
There are 6 (six) cable bushings (holes) in the bottom of the cabinet.
Internal space of the cabinet
Height: Standard 19” rack mountable option
Width: 6U space inside the cabinet for installing telecom equipment
The cabinet supports fan and door open alarms
Low temperature -45 C
High temperature +45 C
Relative humidity of 8 – 100% Rh
Solar intensity of max 1120W/m2
The equipment shall withstand following wind speed:
Ingress protection of enclosure, IP class
The cabinet is made of aluminum alloy and complies with Ingress Proof according to IP55 class
The control board controls the rotation speed of the fans according to the cabinet’s internal temperature information collected by the temperature sensor. The control board has fan alarm output and temperature alarm output.
The above cabinet is exclusively produced for one of our customers. We can produce telecom cabinets according to each customer’s special requirement.
Contact the company