Product or Service
Patrol Hawk Security Home Alarm System
Profile:Manufacturer - Producer|Ref:PSL133534YH | Country: China | Export: No
Wireless home alarm system
A. Support GSM network, no telephone line will be available.
B. Support Monitoring center software though GSM network.
C. Support battery protect function
D. Support memory function
The alarm system adopts SMS data transmission and voice platform of GSM network to send control command and receive alarm remotely. The system can be set delayed-arm. When a signal is detected by detectors, the detectors will send alarm signal to host immediately, then the host sends alarm SMS to its pre-set mobile phone numbers, and meanwhile dials its pre-set telephone/mobile phone numbers automatically and drive wiretap. In addition, users can dial the system and set it in arm/disarm mode by any remote phones.
2. Main functions
1. Auto detects doors or windows are closed or not
2. Built-in SIMCOM, GSM module (SIM300 or SIM340)
3. With color LCD screen & keyboard on the host.
4. Total 24 wireless zones,1 zone for SOS , 1 zone for fire, 1 zone for external power failure, 2 zones for wired alarm.
5. Send SMS to 3 preset mobile numbers & call 3 preset telephone numbers by turns while alarm triggered.
6. 10 seconds recording function when alarming, and support monitor & intercom.
7. Arm/disarm/partial arm/partial disarm by keyboard, remote controller, SMS or remote telephone/mobile phone.(Notes: Disarm by keyboard needs password)
8. Timing control arm/partial arm/disarm.
9. Program alarm host by keyboard or SMS.
10. Modify the content of 26 wireless zones or inquire the status of alarm host by SMS demand.
11. Define the 26 wireless zones into arm/partial arm by keyboard on alarm host.
12. Backup rechargeable battery available.
13. The alarm host automatically stores system status whenever there is power failure.
14. Can work with monitoring software centre
15. Check host's status by SMS
3. Technical parameters
a) GSM network frequency: GSM network frequency b) External power failure alarm
Start-time: less than 1s
c) Alarm response time
Less than 10s (GSM in normality)
d) Power requirements: AC 220V 50Hz
Standby battery: DC8.4V
Standby battery working hours: more than 10 hours
e) Working conditions
Operating temperature: -20 to 60°C
Humidity: 20% to 95%
4.Standard Packing list:
One Main unit
One wireless PIR sensor
One door/window magnetic sensor
One wireless keypad
Two remote controls
One English manual
Contact the company