Product or Service

125K Long range reader

Profile:Manufacturer - Producer|Ref:PSL143884YH | Country: China | Currency: usd | Export: No

PRICE : 68
Currency : usd
incoterm : fob
country : China

ID Long Distance reader is a low cost and high performance long range 125kHz proximity card reader for reading ID code from uem4100 compatible read-only tags.
This reader is ideal for installations incorporating parking control, personal identification, access control and through-wall, hands-free, logistic etc. and long read range applications.
This reader packages all the electronics in one rugged, weatherized epoxy resin enclosure designed to withstand harsh environments as well as provide a high degree of vandal resistance for reliable performance anywhere, attractive and easy-to-install indoor&outdoor
Features;l High sensitivity and reliable performance
l,Built-in transceiver antenna for maximum performance
l,Maximum effective distance up to 1300mm
l,Less than 100ms decoding time
l,Low power dissipation with single power supply
l,Multiple output format optional
l,Built-in buzzer
l,Potted for environmental protection
Power Requirement;more than12 VDC"linear power supplies are recommended"
Interface; Wiegand 26,Wiegand 34,RS232,RS485 or other optional
l,Typical Maximum Read Range Range up to 1000mm even more longer in ideal conditions
l,Frequency;125kHz typical
l,Transponder;Read Only
l,Audio/visual Indication Buzzer output
l,Operating Temperature -20° to + 70°C
l,Dimension "W x H x T";235mm x 235mm x32mm
l Weight;about 1.5 Kg
Proximity cards are presented to the front of this ID long distance reader. The beeper sounds when the proximity cards is read and the message is transmitter the Host computer or interface panes.
Trouble Shooting;
When powered up,the Reader take a self-test to ensure the best reading performance with the buzzer beeping continually. when the self-test ends, the buzzer will give out a bug beep and the Reader enter the normal working mode. If the buzzer continue beeping without stop for a long time, please turn off the power and check out environment and power supply to ensure locating the reader in a good working condition. In case of problems the following procedure should be followed;
Failure to finish self-test with the buzzer beeping continually or with a short reading distance
1,Turn off the power to the reader
2,Check the power input connections making sure that they are not reversed
3,Check the power supply complying with specification
4,If the supply has a current limit , set this to 350mA
5,Make sure to install the reader A in a environment without large area conductors nearby a mounting on a conductive surface. In self-test state , do not apply any tags in Reader’s functional area
6,Try to change the installment of the Reader 5150 to another place to check if the trouble still exists
Radio Frequency Interference
Motors and electronic devices generate RF noise that may interfere the reception of the signal from a transponder.

Information Stock : Product in stock


No attachments

Contact the company