Product or Service
24F+2G Optical Ethernet Switch
Profile:Manufacturer - Producer|Ref:PSL203009YH | Country: China | Currency: | Export: No
24F+2G high-performance smart Layer 2 optical Ethernet switch provides an ideal solution for fiber-to-the-home (FTTH) and fiber-to-the-desk (FTTD), and for the applications where the environmental conditions exceed the reach of CAT5 copper cable. It offers twenty-four 100Base-FX ports and two 10/100/1000Base-TX or optional SFP 1000Base-X ports for flexibility and fast connection speeds. The standard design with a 19-inch rack-mount width and a 1U height gives the highest port (SC connectors) density of optical Ethernet switches on the market. 24F+2G manual-driven configuration console allows administrators to easily setup the switch using a standard RS-232 port.
■Non-blocking store-and-forward shared-memory architecture with an 8.8Gbps switching capacity and an efficient self-learning and address recognition mechanism enables the forwarding rate to proceed at a full wire speed.
■6K address table for auto-learned unicast or static unicast/multicast addresses.
■7 trunk groups of up to 4 member ports within 26 ports with flexible load distribution control and fail-over function.
■Static priority and 802.1p Class of Service with 2-level priority.
■802.3x flow control for a full-duplex mode and collision-based backpressure for a half-duplex mode.
■Port-based VLAN and 802.1Q tag-based VLAN with 255 VLAN groups.
■Head of Line (HOL) blocking prevention
■By-port Egress/Ingress bandwidth management control.
■Broadcast storm filtering.
■Out of Band: RS-232 Console.
Network Protocol and Standards
802.3, 802.3u, 802.3z, 802.3ab, 802.1p, 802.1q, 802.3ad, 802.3x
■Gigabit ports: two 10/100/1000Base-TX RJ45 ports or two optional SFP 1000Base-X LC ports.
■Twenty-four 100Base-FX SC/PC ports
Optical Interface Options
■Dual multimode fiber (50/125μm), single wavelength 850nm, dual LC connectors, operating distance 550m.
■Dual multimode fiber (62.5/125μm), single wavelength 850nm, dual LC connectors, operating distance 275m.
■Dual single-mode fiber, single wavelength 1310nm or 1550nm, dual LC connectors, operating distance 15/40km.
■Single single-mode fiber, dual wavelength 1550nm/1310nm, SC/PC connector, operating distance 15/40km.
■Dual single-mode fiber, single wavelength 1310nm or 1550nm, dual SC connectors, operating distance 15/40/60km.
■Dual multimode fiber, single wavelength 1310nm, dual SC connectors, operating distance 2km.
Power Supply Options
■AC90~264V/1.2A max, 50/60Hz,
■Power Consumption: <35W
Contact the company