Product or Service
60w Co2 Laser Power Supply
Profile:Manufacturer - Producer|Ref:PSL183035YH | Country: China | Currency: | Export: No
1.Good compatibility: It can be applicable to 60W,80W or 100W laser tube manufactured by various factories.
2.Cutting type or Sculpting type: The cutting type has a good power stability and strong adaptability; while the sculpting type has a quick response speed and good engraving effect. It can prolong laser tube’s service life.
3.Easy Control: The start and stop of laser can be easily controlled by TTL level.
4.The power supply has output open circuit protection.
5.This power supply has TTL signal indication, water Through signal indication and laser output indicati
Main Technical Parameters:
AC Input Voltage AC220V or AC110V
DC Input Voltage
DC300V or DC150V
AC Input Frequency
38mA (depending on the laser tubes of different manufacturers)
130% of maximum current
Open Circuit Protection
Yes (short term)
High Electric Level Control Voltage Range
Low Electric Level Control Voltage Range
Earth Leakage Current
Amplitude: 0.5mm frequency 10~55Hz3 dimensional direction 2 hours
Test Time at Full Load and 60°C
Power Supply Switch Test within 7 Seconds
Maximum Dimensions (L*W*H)
Contact the company