Product or Service

ASTM A519 Seamless Pipe

Profile:Manufacturer - Producer|Ref:PSL216203YH | Country: China | Currency: usd | Export: No

Currency : usd
incoterm : fob
country : China

This specification covers for several grades of carbon and alloy steel mechanical tubing, either hot-finished or cold-finished. The steel used in the mechanical tubing may be cast in ingots or may be strand cast. When steel of different grades is sequentially strand cast, identification of the resultant transition material is required. The seamless tubing is a tubular product made without a welded seam. It is usually manufactured by hot working steel, and if necessary, by subsequently cold finishing the hot-worked tubular product to produce the desired shape, dimensions and properties. The tubes shall be furnished in the following shapes: round, square, rectangular and special sections. Heat analysis shall be made to determine the percentages of the elements specified. If secondary melting processes are used, the heat analysis shall be obtained from one remelted ingot or the product of one remelted ingot of each primary melt. The tubing shall be coated with a film of oil before shaping to retard rust when specified. USE: A519 :Seamless Carbon and Alloy Steel Mechanical Tubing  Weight Count:(Just for Carbon Steel)  Weight(Kg/M)=(OD-WT)*WT*0.02466 OD:out diameter  WT:Wall-Thickness Mechanical Tubing Chemical Requirements C max Mn max P max S max Si Cr Ni Mo N 1010 0.08-0.13 0.3-0.6 0.04 0.05 ... ... ... ... ... 1020 0.18-0.23 0.3-0.6 0.04 0.05 ...

Information Stock : Non Disponible en stock
Quantity for a container of



No attachments

Contact the company