Product or Service
Profile:Manufacturer - Producer|Ref:PSL205045YH | Country: China | Currency: usd | Export: No
Packaging & Delivery
Packaging Detail Standard export packaging or customerized packaging
Delivery Detail 20days
Q235B Steel (Chinese standard steel), SS304, SS316 & SS316L
Electro zinc plated – for indoor use to BS EN 12329-2000, 12microns thick.
Powder coated - for indoor use to JG/T3045-1998, between 6 and 10 microns thick
Hot Dipped Galvanized – for outdoor use to BS EN 1461-1999, between 60 and 80 microns thick
Electrolytic Polishing – for stainless steel use
Model W H B1 B2 L Thickness
BLC1505015 150 50 150 300 3000 1.5
BLC2005015 200 50 150 300 3000 1.5
BLC3001002 300 100 150 300 3000 2
: : : : : : :
Sell various kinds of cable ladders according to the drawing and requirement of customers
The advantages of our cable ladder:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable
10.Easy for line check and cleaning , easy maintained.
All sharp ends are cut off to protect cables. Weight loading capacity is 27% stronger than traditional cable trays and cable ladders.
The electric cable tray system are widely used for construction projects, such as layingelectrical wire and cable. Making the lay of the electric wire, electric cable andpipeline achieved the universalized level.
Bends, Risers, T Junctions, Crosses & Reducers can be made from wire mesh cable tray straight sections flexibly in projects.
Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer.
Wire Mesh Cable Tray systems can be safely employed in places where the temperature ranges between -40°C and +150°C without any change to their characteristics
Contact the company