Product or Service
Densimeter for Solid/ Liquid GP-300S
Profile:Manufacturer - Producer|Ref:PSL126222YH | Country: China | Currency: | Export: No
For testing density of Solid/Liquid Industry standard
Solid operation mode: only two steps Liquid operation mode
Principle: According to the standard of ASTM297-93, D792-00, D618, D891, GB/T1033, JISK6530, ISO2781, and adopting the buoyancy method of Archimedean principle, can accurately and directly show the measuring result.
1. It has the function of showing mixture proportion; it is suitable for researching and developing new materials.
2. It has the function of HI limit and LO limit, can judge whether the density of the sample is appropriate or not, and it has the buzzer.
3. The measuring is fast, only two measuring steps, the density and volume can be showed immediately.
4. It has the RS-232C interface, can easily be connected to the PC and the printer.
5. It adopts design of big tank, this can decrease the inaccuracy caused by supporting wire’s buoyancy.
6. It has the liquid mode, and the optional equipment can be chosen. It can satisfy the testing of solid and liquid.
7. GP-120S has the function of density and volume change (can set the time of 1, 10, 30, 60sec)
Model GP-120S GP-300S
Measuring Time About 5 seconds
Measuring Range 0.001~120g 0.01g 〜 300g
Density Precision 0.0001g/cm3 0.001 g/cm3
Value Showed: Density, Volume
Temperature compensation The solution temperature can be set from
0 - 49℃
Solution Compensation The solution density can be set to 19.999
Mixture density Can set the mixture ratio of two mixtures
Setting Can set the density of different mixtures
A: Glass Weight B: Stainless steel weight C: Acid and alkali resistant weight
D: Anti-corrosive water tank E: Printer
Contact the company