Product or Service


Profile:Manufacturer - Producer|Ref:PSL142483YH | Country: China | Currency: | Export: No

Currency :
incoterm : fob
country : China

Drilling mud desilter CN100 is the second class solids control equipment of drilling-fluid solid control system. The design of desilter cyclones are based on the centrifuge-setting principle of particles. The separating drilling fluid goes into the cyclone along its inner-wall at a certain pressure and speed made by the pump. The great particles are going down spirally along the inner-wall of the cyclone at the centrifugal force and the gravity , then running out through the underset nozzle and falling down on the small mush shale shaker for further separation . The other fluid goes up along the centre of the cyclone, and goes into the firth class separating equipment –centrifuge for further separating.
CN series Desilter Technical Parameters
Model CN100×10 CN100×10
Screen area 1.0m2(600×1600mm) No Under fluids Shaker
Capacity ≤1056GPM ≤1056GPM
Cone size 4" (100mm)
Cone number 10-20 Ea Cones, Specify cones No. when ordering
Pressure 0.21~0.4Mpa
Matching pump SB8x6-13(55kw)
Inlet Size 100-150mm 100-150mm
Outlet Size 150-200mm 150-200mm
Separation size 15-20μm

Information Stock : Product in stock


No attachments

Contact the company