Product or Service

drilling rig BZC350C

Profile:Manufacturer - Producer|Ref:PSL161138YH | Country: China | Currency: | Export: No


Currency :
incoterm : fob
country : China
DESCRIPTION

1. BZC-350C truck mounted drilling rig is designed by our engineers; it is a kind of truck mounted and a rotary drilling rig.
2. The truck chassis adopt the special crane chassis of brand SINOTRUK, the transfer case, the main drive system, gearbox, sets of double-winch, mud pump, sewage pump,drilling tower are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation, which is equipped with BW850/2A mud pump, It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it is equipped with a good drilling bit.
4. The power of drilling rig comes from the truck engine, the rig sets up distribute implement and hydraulic system.
5. We can set up the spare electric engine and clutch implement according to client’s requirement, so that the rig can work with diesel engine or electric engine.
6. We can set up a generator (15kw) , so that it is convenient to illuminate or work at night.
7. The adding pressure implement is hydraulic, so it has a high efficiency when the rig drill on mud rock and weathering formation through using the adding pressure implement.
8. The master driving of rig is mechanical, the four landing legs and mast are hydraulic operated. Transfer case, mud pump clutch system are air operated.
9. The appearance of rig is pretty, it has a high efficiency because of having a larger torque of the turntable, it is mainly used for water well, construction, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular with domestic and foreign clients.
10. According to clent’s requirement, the rig can carry out down-the-hole hammer drilling with USA Sullair, Japan PDSKIOOS,Sweden Atlas, China Kaishan,Hongwuhuang; can carry out air lifting reverse circulation drilling with ari-water used tap,double-wall drilling pipe,gas-water separator; can carry out Hydraulic DTH hammer drilling rock breaking with 850/20A mud pump; can carry out core-drilling with other special drilling tools.

Technical parameter
Drilling depth(M) 80 300
Drilling diameter(mm) 1500 500
Speed of turntable(r/min) 21.2;36;63.2;100.6;155;20.2(reverse)
Torque of turntable(KN.m) 18;10.6;6;3.8;2.5;18.9(reverse)
Single rope lifting capacity of windlass(KN) 30
The lifting capacity of hook(KN) 180
Bearing capacity of mast (KN) 180
The height of mast (mm) 11500
Bearing capacity (t) 25
Pipe Kelly bar(mm) 108×108×7500
Assistant pipe (mm) Ф89×10×5500
Transport size(L*W*H)(mm) 12160*2490*3440
Working size(L*W*H)(mm) 11110*2490*13110



Information Stock : Non Disponible en stock
Minimum order quantity

1

Attachment


No attachments


Contact the company
intermediation