Product or Service
Embroidery Heat Melt Adhesive Film
Profile:Manufacturer - Producer|Ref:PSL132349YH | Country: China | Currency: | Export: No
Main Characteristics of Nylon Hot Melt Adhesive Film
1. Not Sensitive to Temperature:
Its raw material is the nylon single-body crystalline compound, not mixture, with soften point about 100 °C, melting point about 115 °C.In addition to being used commonly,it is more suitable to be used in the transportation in the variational weather.It won't be soften or fell at high temperature(below 90°C). In addition,it can resistant cold weather, not becoming fragile and being stable to adhere.
2. Melting Point is Moderate:
The melting point is about 115 °C, so it is suitable to use in operation at common temperature.But you'd better choose the cloth as whole cotton or mixed cloth which are suitable to heat and press at moderate temperature (100°C-180°C), while not suitable to other cloth which can not stand mo-derate temperature such as PVC,PU,nylon,chemical fur and so on. So pay attention if its material does not stand medium heating.
3. Good to Adhere:
Nylon hot melt adhesive film,used with cotton,mixed cloth and other cloth made in hot-resistant materials, is good to adhere.In the test of the strength to adhere cloth with IKG pull-machine,it reaches the international standard of cloth of width in 1CM if the pull-resist strength is more than 3KG when any pattern adhere to cloth.If the cloth and temperature are suitable, the adhere strength of our nylon hot melt adhesive film are all more than 6KG. And other adhesive films made in such as EVA, POLYESTER, PU and so on can't be compared with Nylon hot melt adhesive film,except using with some special materials, for example to adhere to elec-embroidered patterns.
4. Machine, Temperature and Method of Processing:
There are many machines can be used to heat gum on the back of elec-tric embroidered patterns such as electric iron,steam soup heated machine, hot idler wheel machine, supersound,high cycle and so on. But the temperature and time are different when heated pressing are different because of different mechanical pressure, performance, area to electric embroider, thickness of two layer of cloth which adhere to each other, working temperature and so on. As in Guangdong provience, to stangdard pressure heated machine, the tempe-rature in early stage is about 120°C when heated print patterns, and the time to heated press is 2-3 seconds, but in winter,as the temperature is rather low, so the heat goes off quickly, so you'd better turn the temperature on about 5°C,or heated press another 1-2 seconds.
If you want to learn more, you can mail or call us. Looking forward to your cooperation. We are sure that you will find the satisfactory commodities.
Contact the company