Product or Service
Flexible Graphite Ring
Profile:Manufacturer - Producer|Ref:PSL192626YH | Country: China | Currency: | Export: No
W201 Flexible Graphite Ring
W201D Die Formed Graphite Rings
Die-formed Graphite Ring is made of low-sulphur expanded graphite without any fillers or binders. They are compressed in precise moulding tools to the required density. Due to the high purity of the material (>99%), no special corrosion protection is required. In general, it has square section and also has V-shaped and wedge- shaped section, the rear two kinds style are suitable for high pressure sealing.
W201R Reinforced Graphite Rings
Moulded from pure flexible graphite with reinforcement, the insert materials stainless steel foil or mesh etc. are available on request. To protect against oxidation, the stainless steel cap is necessary.
＊High Carbon content 99% Min.
＊Contains no rubber or binder, 100% Asbestos free.
＊Widely working temp. from -200℃ to +3300℃ in non-oxidizing.
＊Max. working pressure: 700bar.
＊Chemistry resistance, oxidation resistant and corrosion resistant.
? Fans (Dry running) Agitators Valves
Pressure 10Bar 50Bar 800 Bar
Shaft speed 10m/s 5m/s 2m/s
Density 1.2~1.75g/cm3 (Normal: 1.6g/cm3)
Temperature -220~+550°C (+2800°C in non-oxidizing environment)
PH range 0~14
As pre-pressed rings (full or split)
Straight cut and slanted cut on request.?
Min. cross section:? 3mm
Contact the company