Product or Service
GCK (L) system low-voltage switch cabinet
Profile:Manufacturer - Producer|Ref:PSL202265YH | Country: China | Currency: | Export: No
一. Product Overview
GCK (L) system low-voltage switch cabinet applies to all power generation, distribution and electricity use occasions such as: power systems, petrochemical, industrial and mining, civil construction and so on. The system of GCK (L) uses the rack structure which is flexible assembly and the cabinet can be installed to different standard components to meet various application requirements. Withdrawable unit with aluminum sliding rail and screw advance mechanism which working position is in evidence and with a lightweight reliable operation.
This product complies with IEC60439-1, GB7251 `1-1997, JB/T9661-1999 and other standards. The system installation and connection is according to IEC364 standard
The fundamental part of the GCK (L) system with a profiles skeleton of the 20MM interval modulus hole. All the frame parts are maintenance-free type.
GCK (L) system is fully enclosed housing, protection class is IP32. Bottom of the tank backed with bottom plate and the cable outlet can be equipped with fire-retardant insulation flange plate. The door panels and housings can be assembled a single / multiple vents, type of roof is full ventilation.
With high-current units and small current loop unit design; the small door of the two drawers are independent in the same layer of the cabinet, without disturbing each other, compact, flexible assembly, rational layout, arranged in neat rows, covers less area ; solid structure, reliable chain, high security, fully functional; easy operation, good swap performance, well short-time withstand current, good compatibility that either to assemble GCL power center and can also be assembled into the GCK motor control centers and measurement of lighting or power compensation purposes etc.
三． Normal use environment and conditions
1. An ambient air temperature is not higher than +40℃, or lower than -5℃ and average temperature not higher than +35℃ within 24h.
2. Weather conditions: clean air, relative humidity does not exceed 50% when the maximum temperature is +40 ℃ but at lower temperatures allow higher relative humidity.
3.This product is applicable to the transport and storage of the following temperature: between the range -25 ° C to +55 ° C can be up to +70 ° C in a short time (less than 24H) , the device should not get any irreversible damage in these extreme temperatures, and under normal conditions should be able to work properly.
4. If the above conditions can not meet, users should rise to factory side during the order stage to discuss the settlement.
Contact the company