Product or Service


Profile:Manufacturer - Producer|Ref:PSL85672YH | Country: China | Currency: usd | Export: No

Currency : usd
incoterm : fob
country : China

Only two weighing steps, the purity% of precious metals and gold karat can be tested rapidly and accurately.
No stains and scratches left on your gold after testing, it don’t need to use the sulfuric acid solution to test the standard samples.
It can easily judge the alloys with the metallic-membrane plating of more than 30μm thickness.
With the special software design, it can directly cycle show the gold karat and gold purity% (including gold-copper-silver, gold-silver, gold-copper)
With the function of high limit and low limit, the wide karat range from 9K to 24K and the data of HI and LO can be set freely.
With the mixture proportion function, it can test other precious metals, such as: platinum, silver, palladium, copper, rhodium and so on
It has the RS-232C interface, can easily connect to the PC and the printer.
It adopts design of tank (the maximum dimension of the sample is D100×W70×H25mm for solid measuring), this can decrease the inaccuracy caused by supporting wire’s buoyancy.
Can’t test the samples inlaid precious stones and hollow samples. It can be used as general balance.


Measurable Range :
0.02g 〜1200g

Measurable Weight :
30g〜 1200g

Density Resolution:
0.01 g/cm3

Compensation of water temperature 、
Compensation of other medium density

The display shows Karat、Density of Gold and
Purity%、Density of Platinum

Display value:
Gold karat, density, purity%

Display cycle value:
Gold Karat(gold-copper-silver, gold-silver, gold-copper) switches
Gold purity%(gold-copper-silver, gold-silver, gold-copper) switches

Range of karat value:
It can set the gold karat’s high limit and low limit, such as 5K~24K

setting of proportion parameter:

Mix density
The mixture proportion function of two mixtures

Display Value:
The proportion value, density of main metals

Proportion value
Can input the different proportion value, such as 24, 100

Setting of high limit and low limit:
It shows “Hi” when the value is > upper limit, shows “Lo” when < lower limit.

Can set the density of different mixtures

Standard interface :

Information Stock : Product in stock


No attachments

Contact the company