Product or Service
High Speed LED Dental Handpiece with generaotor ( Triple water spray)
Profile:Other|Ref:PSL211327YH | Country: China | Currency: | Export: No
Product Code: ITS-KA-LED01
ITS E-Generator LED Dental handpiece brings light to dental offices that have been using handpieces those do not have the light on the tip. It has an internal power motor that is air-driven, which supplies LED lighting to the tip of the handpiece, so dental professionals can view the operation area without outside light. In fact this ITS-LED lighting system is even more focused and bright than most fiber optic system.
Inside bearing is ball bearing. Ball Bearing has two built-in ball bearings which makes it low noise, less vibration while revolving. It can work better and longer. There is a groove on each ball bearing, which can contact to O ring to make the cartridge tight. The bur will not shake and it will be safer to patient.
-. LED E-generator intergrated high speed dental handpiece 1:1 ratio
-. Self-sufficient power system instead of external light source. Self-illuminated, natural light
-. Air Pressure at the back end of handpiece: 250KPa 300KPa(300KPa preferred)
-. Air pressure at the gauge in the dental unit: 277-316 KPa (2.8-3.2 kgf/cm2)
-. Water pressure:198Kpa (2 kg)
-. Rotation Speed : 300,000-450,000 rpm
-. Head Height:5 mm( torque ) 14.5 mm( standard )
-. Head Diameter:12.5 mm( torque ) φ11.2 mm( standard )
-. Chuck type: wrench chuck or push button
-. Bur applicable : φ1.59mm~φ1.6mm×21mm~23mm (diameter × length)
-. Noise: below 60dB
-. Triple water spray - Extra cooling to treated areas and bur
-. Sterilization by autoclave at (135) Centigrade
-. Standard 4 hole, screw-on connector with a 360°swivel disconnect
-. Ergo Grip-Secure Grip for your confidence
-. Warranty: one year for handle; six months for cartridge
Please contact us through ITSDental website directly; we will get back to you within 24 hours.
Contact the company