Product or Service
Lexia-3 Citroen/Peugeot Diagnostic PP2000 V21 PPS
Profile:Manufacturer - Producer|Ref:PSL109898YH | Country: China | Currency: eur | Export: No
PP2000 V21 Lexia-3 Citroen/Peugeot Diagnostic
PP2000/LEXIA-3 Interface works for both Citreon and Peugeot!
There is a related PDF proflie, if you need, you can check it in the OBD2 Technical Service
It compatible with Citreon cars including, C1,C2,C3,C4,C6,C8,C-CROSSER, NEMO, BERLINGO,JUMPY, JUMPER, AX, SAXO, BX and so on.But please pay attention,according to our customer's experience,this item can not works well at C5 models.
It compatible with most Peugeot cars from 1995,but it can not work well with Peugeot 307.
If customer have this two types of cars,please pay attention.please check with us first before purchase.
Diagnosis is performed via OBD-II connector (which is located near steering wheel) or via manufacturer specific connector (only older cars, pre-2001).
Unlike other universal car scanner tools which only read fault codes, this software performs nearly all the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
The following diagnostic functions are supported:
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2.Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3.Clear fault codes
This function clears all stored fault codes and other diagnostic information.
4.Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging file is also supported, which allows offline analysis.
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.
1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable
1pc x 16pin to Clip Cable
1pc x Instruction for Installation and Activation DVD for PP2000
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungarian, Greek, Czech
1piece a package
Contact the company