Product or Service

pneumatic actuator

Profile:Manufacturer - Producer|Ref:PSL100230YH | Country: China | Currency: | Export: No

Currency :
country : China

Position Indication:
The Actuatorvalve position is shown via a color-coded insert and NAMUR slot. The indicator is suitable for either direction of actuator rotation, and drive shaft size.
Actuator Drive:
The NAMUR drive slot on the position indicator permits direct drive engagement of switch boxes and positioners.
Direct Mounting of Sensors:
The indicator can be supplied with metal inserts to allow for easy installation of many types of sensors.
Operating Media:
Dry or lubricated air or inert n-corrosive gases on condition that they are compatible with wetted internal actuator parts and lubricant. The operating media dew point must equal either -20C (-40°F) or 10C below the ambient temperature. The maximum particle size must not exceed 30 microns.
Supply Pressure:
For Double Acting and Spring Return actuators the maximum supply pressure is 8 bar(116 psi). The minimum supply pressure is 2.5bar(40psi).
Operating Temperature :
Normal temperature (NT) actuator with NBR“O-rings” from -20C (+4°F) to +80 C (+176°F).
Low temperature (LT) actuator with Silicon “O-rings” from -50C (+58°F) to +80C (+176°F).
High temperature(HT) actuator with FPM “O-rings” from -15C (+5°F) to +150 C (+300°F).
CAUTION: For high and low temperature service special grease is required. High and low temperature will vary the output torque of the actuator. Please contact a ROPO sales representative for each application.
Stroke: See technical data
Standard construction: 90°rotation with stroke adjustment at 0°and 90°+/- 4°.
Operating Time: See Technical Data Sheet.
The standard lubricant is suitable for use from -50C (58°F) +80C (+176°F). Construction:
Durable twin piston rack and pinion actuator design is suitable for both indoor and outdoor applications.

Information Stock : Product in stock
Quantity for a container of



No attachments

Contact the company