Product or Service
Profile:Manufacturer - Producer|Ref:PSL144615YH | Country: China | Currency: | Export: No
Single-phase 200~240V, 50/60Hz
Three-phase 200~240V, 50/60Hz
Three-phase 380~415V, 50/60Hz
Three-phase 440~460V, 50/60Hz
Three-phase 575V, 50/60Hz
Three-phase 660V, 50/60Hz
Three-phase 690V, 50/60Hz
Allowable Fluctuation range
voltage: ±15% frequency: ±5%
high performance vector control inverter based on 32 bit DSP
G/F/Z/S/T/M type: 0.00~800.0Hz, maxmum frequency can be set between 10.00 and 800.0Hz
H type: 0.00~2000.0Hz, maxmum frequency can be set between 10.00 and 2000.0Hz
Sensorless vector control
Sensor close loop vector control
speed adjustable range
Speed stabilizing precision
waveform produce methods
Asynchronous space vector PWM, N-class sub-synchronous space vector PWM, two-phase optimization of space vector PWM.
Auto torque boost function
Achieve low frequency (1Hz) and high output torque control under V.F control mode.
Accelerate /decelerate control
Sub-set S curve acceleration and deceleration mode, maximum acceleration and deceleration time is 3200 days
Long running time control
16 segments speed run, maximum running time is 3200 days
frequency setting accuracy
Digit: 0.01Hz(below 300Hz), 0.1Hz(above 300Hz);
alalogue: 1% of maxmum frequency
Speed control tolerance 0.01%(25°C±10°C).
V/F curve mode
Linear, 1.2 times the power, 1.7 times the power, 2 times power, user-set 8 V / F Curve.
Over load capability
G / S type: 150% rated current -1 minute, rated current 200% -0.1 second;
F: rated current 120% -1 minute 150% of rated current -0.1 second;
Z / M / T type: rated current 180% -1 minute 250% rated current -0.1 second;
H: rated current 250% -1 minute 300% rated current -0.1 second.
V / F control can automatically compensate for deterioration.
-10°C ~ 40°C, 40 ~ 50°C derating between the use is increased by 1 °C, rated output current decrease of 1%.
5~ 95 %, No condensation
0 ~ 2000 meters, 1000 meters above derating use, increased by 100 m, rated input decreased%
Mounted vertically inside the control cabinet with good ventilation, do not allow the level , or other installation method . The cooling medium is air. Installed in the absence of direct sunlight, N dust, N corrosive and explosive gas, N oil mist, N steam, N drip environment
Forced air cooling and natural air cooling.
Contact the company