Product or Service

rfid USB plug&play reader

Profile:Manufacturer - Producer|Ref:PSL143881YH | Country: China | Currency: usd | Export: No

PRICE : 15
Currency : usd
incoterm : fob
country : China

Product Introduction
This device adopt with micro-electronics RF receive module and embedded type microcontroller,combine with high efficient decoding algorithm and advanced data Processing Technology, to fulfill decoding and data output for 64bits read only type IC,ID,2nd generation identify card and it’s compatible RFID tag. This reader work as one type of external input device for PC, it can read many types of RF card serial number and output to PC via USB port, cyber bar management software can easy use for record the card number, and it can be use in various managements, this device performance is reliable and easy for handle. IC,ID,2nd generation identify card can be directly show in text file, word file etc.
1, Tag type;ID IC "14443A,B&15693" 2nd Generation Identify Cards
2, Appearance; Black
3, Working frequency;125K or 13.56MH
4, communication format;USB standard keyboard output
5, Data format;
1.Decimal 3 byte,
2. Decimal 4 byte,
3.Hex 4 byte,
4.Hex 3 byte,
5. last 8 bit,
6. Customizable Data Formatting
1, Reading range;more than60mm
2, Reading time;less than 100ms
3, Output interface; USB port RS232 port
4,Output interface; standard USB1.1 "Plug & Play"
5, Power supply;USB port 5V
Installation instructions
Put the reader’s plug to plug in PC USB port, red and green led flash for once, the installation success;open the relevant software and it get in input status for present tag, beep once、green led flash once,dialogs box appear a bunch of number and automatically get to “enter” status. This is means system running in normal, this bunch of number is RF card serial number.
Cautions and Troubleshooting
1、 Reader should be install in correct place that convenient for present tag. It should far away from displayer, since the displayer may interference with the reader working.
2、 Do not close to large area of metal material"especial metal material surface",otherwise the reading distance will be shorter or not read tag.
3、 The cable between reader and PC should be less than 15m.
4、 If present tag there is no response:please check connector if the plug connection well; if the RF card if support; RF Card whether damage;If there is other RF card within the reading range.
5、 Data transmit error;if the reading is in strong electromagnetic interference environment;The communication cable between reader and PC is too long.

Information Stock : Product in stock


No attachments

Contact the company