Product or Service
Self-cleaning Special Finishing Varnish Paint
Profile:Manufacturer - Producer|Ref:PSL158135YH | Country: China | Currency: | Export: No
apply to Finishing Varnish of all exterior wall
1. Store in cool, dry place,
2. Keep out of reach of children and away from food, drink and animal feed.
3. Please see label on the product for prduction date and shelf life.
Painting Envioroment: Temperature between 5-40 degrees centigrade, relative humidity less than 85%.
Application Tools: Roller, Spray
Theoretic consumption: 2.5-3.5m2/KG/coat (depending on the substrate conditions)
1. one or two coat relative alkali-resistance seal primer is necessary (roller or spray)
2. two or three coat finishing wall paint
3. To paint one coat self-cleaning varnish(color customized) would get better antifoulant effect.
Notes for use:
1、 Completely churning up before using, dilution with water according to product specification if necessary, but not too much.
2、 Ventilating before application
3、 Putty must be completely dry if it is made up by alkyd ready mixed paint, then painting seal primer and finish coating. Otherwiswe there would be yellowing after painting.
4、 Do not paint with oil-based coating like enamel polyester paint or floor paint in case of yellowing.
5、 Waterproofing work is necessary when applicating in kitchen or wash room in case of mould after painting.
6、 Do not applicate in when temperature is less than 5℃ and humidity more than 85
%. Diluted with water as less as possible and coating film be thicker in winter in case of pull-up.
7、 Primer is necessary and dilution must be within 10% if applicating colorful emulsion. Also, applicating more coats in case of floating or revealing.
8、 Do not put superfluous diluted paint back into original barrel, and not blot too much paint on brush or rooler when applicating.
9、 Completely clean tools with water after applicating.
10、 Store product in cool and ventilated place and avoid insolation and frreeze
Contact the company