Product or Service

tapered roller bearing

Profile:Manufacturer - Producer|Ref:PSL205032YH | Country: China | Currency: | Export: No


Currency :
incoterm : fob
country : China
DESCRIPTION

Tapered Roller Bearing a conical inner and outer ring raceway, Tapered Roller arranged in between, all conical surface projection lines in the bearing axis to meet the same point, this design enables Tapered Roller Bearing particularly suited to bear composite (radial and axial) loads. Tapered Roller Bearings can best way to stress distribution in the Roller Raceway contact with the surface, thereby enhancing the reliability and affordability of error of perspective. LHB provides a wide range of sizes series of Tapered Roller Bearings, single row, matching single, double row, and four Tapered Roller Bearings can meet a wide range of applications.
We can produce the diameter from 15mm~360mm LHB single row tapered roller bearings,Following is the internal structure of LHB different product descriptions.
B Steeper contact angle than standard design
CLN Reduced tolerances for ring widths and total (abutment) width; corresponds to ISO tolerance class 6X
CL0 Accuracy to ABMA tolerance class 0 for inch bearings
CL3 Accuracy to ABMA tolerance class 3 for inch bearings
CL7A High-performance design for pinion bearing arrangements (superseded by CL7C)
CL7C High-performance design for pinion bearing arrangements
E Enhanced design.
HA1 Case-hardened inner and outer rings
HA3 Case-hardened inner ring
HN1 Inner and outer ring with special surface heat treatment
HN3 Inner ring with special surface heat treatment
J Pressed window-type steel cage, roller centred. A figure following the J indicates a different cage design
P6 Dimensional and running accuracy to old ISO tolerance class 6, better than Normal
Q Optimized contact geometry and surface finish
R Flanged outer ring
TN9 Injection moulded window-type cage of glass fibre reinforced polyamide 6,6, roller centred
U. U combined with a one-figure number identifies reduced total width tolerance.
VA321 Optimized internal design
VA606 Crowned raceway on bearing rings and special heat treatment
VA607 Crowned raceway on bearing rings and special heat treatment
VC027 Modified internal geometry for increased permissible misalignment
VC068 Increased running accuracy and special heat treatment
VE174 One locating slot in outer ring at large outer ring side face, increased running accuracy
VQ051 Modified internal geometry for increased permissible misalignment
VQ495 As CL7C but with reduced or displaced tolerance for the outside diameter
VQ506 Reduced inner ring width tolerance
VQ507 As CL7C but with reduced or displaced tolerance for the outside diameter
VQ523 As CL7C but with reduced inner ring width tolerance and reduced or displaced tolerance for the outside diameter
VQ601 Accuracy to ABMA tolerance class 0 for inch bearings
W Modified ring width tolerance, +0,05/0 mm
X Boundary dimensions changed to conform to ISO

Information Stock : Product in stock

Attachment


No attachments


Contact the company
intermediation