Product or Service

TDS Meter|TDS tester| TDS pen

Profile:Manufacturer - Producer|Ref:PSL122421YH | Country: China | Currency: | Export: No

Currency :
incoterm : fob
country : China

TDS Meter|TDS tester| TDS pen
Water quality tester
Range:0~9990ppm (mg/L)
Accuracy: ±2%F.S
Calibration:Factory Calibrated
Temperature Compensation: Automatic
Operating Temperature: 0~50°C
Power source: 2×1.5v(button cell)
size: 142X 25X15mm
weight: 36g
1.remove the protective cap. the ON/OFF button once out of the water. The tester will read “000”
3. Immerse the tester into the water no more than 2 inches.
4.wait for the display to stabilize. The tester automatically compensates for temperatures variations. Once the readout stabilizes(10-30seconds), press the HOLD button to view out of the water. the ON/OFF button again to turn off the tester. The tester will shut off automatically after 10 minutes of non-use.
6.after usage, shake off the water from your tester or wipe it with a tissue.
Note: If the tester displays a flashing”X10”icon, multiply the reading by 10.

Information Stock : Product in stock


No attachments

Contact the company