Product or Service

Ultrasonic Thickness Gauge(UM-1)

Profile:Manufacturer - Producer|Ref:PSL84561YH | Country: China | Currency: usd | Export: No

Currency : usd
country : China

UM-1 ultrasonic thickness gauge made by our factory is a simple-to-use, highly accurate, hand-held ultrasonic thickness gauge with the operating principle of ultrasonic wave measuring. It can measure quickly, nondestructively and precisely with a resolution of 0.1mm or 0.01in. This instrument can be widely used in the fields such as manufacturing, metal processing, chemistry and business inspecting for measuring the thickness of all sorts of materials where ultrasonic wave can spread through with a constant speed and get the reflection from the back side. Apart from making accurate measure on various kinds of plates and processing components, it can also make detection on various kinds of pipes and pressure containers of the manufacturing facilities about their thickness loss after corrosion. Um-1 is an incensory specialized instrument for material protection.
Operating principle: Pulse~Echo mode.
Tech Data:
Measuring Range:
0.8~300mm / 0.031in to 11.81in(Depend on the probe, materials and surface conditions)
Unit and Resolution:
Material’s Velocity Range:
Linearity Error:
Up to 1in: ±0.002in or ±0.1mm
Above 1in: ± 1%H (H-the height of the analyte)
Display Screen:
128*64 dot-matrix LCD(42*57mm)With EL backlight and switchable contract ratio
Probe zero adjustment (Selectable):
1-point calibration: normal measurement
2-point calibration: curve surface measurement or other special application with a high precision
Data Storage:
Divided 5 arrays, could store 500 thickness values
Minimum value checking:
Move the probe along the surface of the testing material, UM-1 is able to automatically find the thinnest point.
Warning function:
If the measured value exceeds the pre-set thickness limit, the warning tone will start.
V-Path Modification:
Auto V beam path modification, could cover the nonlinearity for double crystal probe
±0.001in or±0.1mm
Auto shut-off:
Will shut off automatically after 5 min. of non-use
Working Temperature:
-10℃~+50℃,+14℉ to +122℉and could reach -20℃/-4℉ in special requirement
149×73mm×32mm (H×W×D)
200g (including batteries)
Two 1.5V AA alkaline batteries
Warning with low battery voltage
Measurement update rate:
4 Hz in standard measurement mode
25 Hz in MIN capture mode
Operating time:
Up to 200 hours (without backlight) with alkaline batteries, depending on operating mode
Standard package:
UM series thickness gauge
Standard probe
Carrying case
Two 1.5V AA alkaline batteries
Operating manual
Certification of quality
Packaging list
Optional accessories:
Attachable rubber case
Numerous special probes on request
Couplants and high-temperature couplant
4-step/6-step block for calibration
Data transmission cable
Application software

Information Stock : Product in stock
Minimum order quantity


Quantity for a container of



No attachments

Contact the company