The advantages of AC LED compare DC LED
AC LED light source DC LED with integrated form packaging LED light source
Silicon carbide wafer's thermal conductivity is fast (at the same level with CREE) Sapphire heat conduction is slow
Resistant to high temperature of 180°, lower demand for radiator , the cost greatly reduced Resistance to temperature is low, heavy, high freight cost
Silicate phosphor powder can reach 300°, lumens depreciation is very low General phosphors only up to 70°, light failure quickly
Don't need the power driver, AC input directly Need to go with the different power supply, easy damaged by unstable power supply design
Super cryogenic use, can be used in subzero 50° environment Is limited by capacitance of power supply's conditions, typically up to subzero 40°
Using traditional TRIAC dimmer, the cost is very low Using PWM DIMMER light of architecture, cost more
PF efficiency is more than 90-95% The PF efficiency depends on the power supply
Assembly used in module, effectively reduce the processing time and manpower costs Processing time is long, and need to consider the cooling system and problem of waterproof
Each watt 130 lm luminous efficiency 80-120 lm luminous efficiency per watt
Color rendering is high, more than 85 Color rendering is 70-80
Made in Taiwan Domestic packaging
ENVIRONMENTAL
Operating temperature:-30 to 50°C
Storage temperature:-40 to 85°C
Humidity:5% to 95%
Cooling Convention
Leakage current:30,000 Hours at full load and 25°C ambient conditions
specification:5W 10W 50W 80W 100W 120W 150W 180W 200W@110V /220V
PF>90
High color rendering Ra>85
Lumen: 130LM/W AC-AC
Application: apply to courtyard lights, outdoor lights, street lamps
Wide univoltage range of application: 110v-160v/220v-260v
Wide current characteristic: 100mA-400mA
Do not need LED power supply , reduce the variable factor of the components.
CCT: 3000K-7000K
Demperature reduction:30%
100w COB just need 70w’s radiator
Angle choose: 60°,90°,120°
All specification can be base on customer’s requirement.
