General Description
CC1120 is a fully integrated single-chip radio transceiver , this radio transceiver designed for use in cost-effective wireless systems low power and low voltage operation to achieve high performance. All filters have been integrated , so no expensive external surface acoustic wave (SAW) and intermediate frequency (IF) filters. The device is mainly used for ISM ( industrial, scientific and medical ) applications as well as in the 164-192MHz ,410-480MHz and 820-960MHz on the SRD ( Short Range Device ) frequency bands.
CC1120 provides extensive hardware to support for packet handling, data buffering, burst transmissions , clear channel assessment , link quality indication and wake on radio . CC1120 main operating parameters via serial peripheral interface (SPI) interface. In a typical system , CC1120 will work with a microcontroller and minimal external passive components used in conjunction.
F212 uses a high-performance 32-bit MCU development of RF transceiver modules, integrated USB interface , can be directly through the computer 's USB to serial port functionality for RF transceiver , suitable for notebook and a variety of desktop computers, can be applied to a variety of industrial applications.
Performance description :
Adjacent channel selectivity : 12.5kHz offset to 65dB
Blocking performance : 10MHz 90dB when
Excellent receiver sensitivity :
1.2kbps when 123dBm
50kbps when 110dBm
127dBm using the built- coding gain
RX: RX sniffer mode is 2mA
RX: In low-power mode, the peak current of 17mA
RX: In high-performance mode, the peak current of 22 mA
TX: 45mA +14 dBm
Power down mode : 0.3µA
Supported modulation formats :2-FSK ,2-GFSK, 4 -
FSK ,4-GFSK, MSK, OOK
Applications
12.5kHz channel spacing as low as ultra-low -power narrow-band radio system
170/315/433/868/915/950MHz ISM / SRD band
Wireless metering and wireless smart grid (AMR and AMI)
IEEE 802.15.4g system
Home and building automation
Wireless alarm and security systems
Industrial monitoring and control
Wireless Medical Applications
Wireless sensor networks and active radio frequency identification (RFID)
Private mobile radio
Module Description
Integrated USB interface
USB-powered
Support narrowband
Anti-jamming capability enhancement module
Operating voltage 5V
Operating current 80mA
Operating temperature : -40 +80 ° C