BD-ONU-211HW is mainly designed for FTTH,FTTO application. BD-ONU-211HW support 1000Base-PX20+ standard with 1:64 maximum optical splitting ratio and 20km distance, and provide 1uplink EPON port.
BD-ONU-211HW work together with OLT could realize flexible network structure and maintenance and provide total FTTx solutions.
The GE wifi ONU has 1 PON port ,3 10/100BASE-T ports,110/100/1000 BASE-T ports and support Wi-Fi.
Function Parameter
Internet connection Bridge / Routing
LAN Support Port rate limitingSupport Loop detectionSupport Flow control
Support Storm control
VLAN Support VLAN tag modeSupport VLAN transparent modeSupport VLAN trunk mode
Support VLAN translation mode
Support VLAN QinQ mode
Multicast Support IGMPv1/v2/v3Support IGMP Proxy and MLD ProxySupport IGMP Snooping and MLD Snooping
L3 Support IPv4、IPv6 and IPv4/IPv6 dual stackSupport WAN DHCP/PPPOE/Static IPSupport Static Route
Support NAT
Support Port forwarding
Support DHCP server
Wireless Support 802.11b/g/n and Mixed modeSupport No-auth、WEP、WPA-PSK and WPA2-PSK function with AES、TKIP encryption
Security Support FirewallSupport Mac filterSupport ACL
Support URL filter
QoS Support 4 queuesSupport SP and WRRSupport 802.1P
Support DSCP
Management Support CTC OAM 2.0 and 2.1Support WEBSupport TELNET
Support TR069
Specification:
Parameter Name
Hardware Parameter
PON EPON, SC symmetric 1.25Gbps, single-mode/single-fiber
PON Port Type BOSA
Wavelength Tx 1310nm, Rx 1490nm
Sensitivity -3dBm(PX20+)
Optical Type SC/PC
LAN Interface 110/100/1000Mbps + 310/100MbpsAuto adaptive Ethernet interfaces, Full/Half Duplex, RJ45 connector
Wireless IEEE802.11b/g/n, 300Mbps, 2T2R , 2 External
Indicators 8, For POWER、LOS、REG、LAN、WiFi
Power adapter input 220V AC，50HZ
Ambient temperature -20 ~ +55℃
Ambient humidity 10% ~ 90%(non-condensing)
Store temperature -30 ~ +60℃
Store humidity 10% ~ 90%(non-condensing)
Dimension（L x W x H） 185mm×122mm×33mm
Power 12V, 1.5A
Power Consumption ≤10W
Weight（No Power Adapter） About 300g
