Models:
SK-T2000D1: One-gang for incandescence lamp Max. 200W, Remote control available
SK-T2000D2: Two-gang for incandescence lamp Max. 200W*2, Remote control available
Discription:
·Touch-Type button to control. Touch the panel interface gently, you can control the dimmer The picture on the panel can be DIY by you
·LED backlight indicator, easily locate the position of switch even in the dark.
·Reverse operation should be proceeded after stop it. This helps users get appropriate control safely
·Can be controlled by our remote control
·ABS fire resistant.
·Suitable for decorative design in homes, office buildings, and star hotels.
·Easy installation and operation，fit to the BS4662 stardard back box.
Specification:
·MCU processor: 24MHz/64k MCU
·Key: Can customize 1-5 bit touch keys
·Current loading: 200W or 400W
·Wiring: Control terminal should be connected through 8-Pin wiring teminal
·Dissipation power: 1.2W
·Service life: If contact is 240v, it is more than 100 thousand times for use while full load; touch panel keys can be one million times
·Operating humidity: At 50℃ 10-95%RH
·Operating temperature: -10-60℃
·Envionment: Transport and store temperature range: -20℃ to 80℃
·Installation Install to the standard BS4662 switch box with screw and thickening bracket
·Dimension: W86mmH86mmD42mm
·Applicable: incandescent lamp, fluorescent lamp, 12v spotlight with transformer, 220v sportlight
·Optional colors: CCR(Satin chrome), ABS, SCR(Bright chrome), PCR(Pearl Chrome), SCR+PVD (PVD Bright Gold), CCR+PVD(Zirconium Gold)
If you are interested in them, Pls contact [email protected]
