We provide both two and three Phase Water/Oil/Gas Separators, like Test Separator, Production Separator and Filter Separator.
Performance and Application:
Used for dewatering, degassing and sand removal from crude oil
Any water content of inlet crude oil are applicable.
Any contents of oil and gas are applicable;
Crude oil density is less than 980 Kgs per cubic meter
Operating temperature is from -10 to 60°C
Operating pressure from 0.3 to 8.0Mpa
Processing capability is from 10 to 10,000 cubic meters per day
Dimensions of the tanks from OD2.2 m x 10 m to OD 3.2 x 18 m
Average water content in purified crude oil is less than 0.5%
Average gas content in purified crude oil is less than 0.005g per cubic meters
Oil content in the treated water is less than 50ppm
Advantages
Embedded by pulse electric field. More than 90% of crude oil removal clean water once.
Save the coalescence poling board and packing, Can make the equipment volume reduced by 66.7% and weight reduced by 50%.
Through the efficient components can remove the capture of gases. With more than 10μm diameter 99% of droplet, gas fluid containing less 0.03 g meet for requirements.
Using the inclined plate and the pressure inside the process that exclude, to improve the efficiency of clay sand (except (size) > 30μm. Except sand ratio (98%), ensure containers not accumulate sand (mud).
Using the computer intelligent control, automation system.
Traditional three-phase separation technology simplified,After the optimization process level, Improve production efficiency.
