Characteristic 1. Four functions for T-shirt Press (30x38cm), Mug (DIA:
7.5-9cm), Plate (DIA 11cm, 15cm is optional) and hat. 2. Digital control system
PID Micro-computer controller .high precision (1) has micro-switch knob. 3. All
digital time show, high accuracy. 4. Heat Tube integrate with Heat Board in one
unit, safety, durable, heat distribute uniformity. And strong heat exchange
5.There is a protecting layer which composed of fluorine and titanium on heating
plate 6.There is a silica gel pad which can withstand 400 centigrade and doesn't
distortion on the motherboard 7. Pressure adjustable. Easy operation 8.Beautiful
appearance, small and exquisite cubage ,effective improve working
Specifications: Dimensions:(L x W x H) 38x43x34cm Voltage: 220-240v Power: 1250W
Temperature range: 0-380 degree Color: white Net weight:33kg Gross Weight:34kg
Timing range: 0-999sec CE Certificate Operation : 1. Turn on power switch, the
indication light will bright. 2. Hold the handle then turn the heating plate to
right. 3.adjust the temperature controller to the suitable temperature
(generally : 120-200, 4.adjust the timer to the suitable time.( generally:
5sec-20sec) 5. Put the clothes flat on the heating plate, then cover with the
transfer paper on the clothes, (please note the obverse and reverse of the
paper).pull the heating plate to the original place, press the handle down until
the end. 6.the buzzer will alarm when time is over , at this time you should
take the handle up to the original place Notice: 1. A suitable and firm earth
wire for protection is required. 2. Please note the obverse and reverse of the
paper when cover the heat transfer paper. 3.if want to tear off the transfer
paper in the cold condition , please wipe the paper by brush first , wait 5-10
second , then tear off the paper 4. If want to tear off the transfer paper in
the hot condition. please tear it off immediately after printing 5. A suitable
time, temperature and pressure are all important factors to a successful
transfer printing; and the thickness of the clothes, the material and the kind
of the transfer paper can also influence the effect. 6.we are provide all kind
of heat transfer paper 7.Please test for print before produce as batch
Maintenance: 1, Pressure: if the pressure is not enough or too much, you can
loose the pressure screw to adjust it. Please close the adjust lock screw firm
after adjusted. 2., Temperature: if the temperature was reached the set point
but the heating plate does not work. Please Check the temperature controller was
connecting the power or not while confirms whether the electrical source broken
or not. (Temperature controller needs about 5 minutes to reach 180 centigrade
from 0 centigrade). 3. Time: when time is over but the buzzer does not alarm or
alarm endlessly, please check the micro-switches point whether have a suitable
distance.
