Main features:
1.Good compatibility: It can be applicable to 60W,80W or 100W laser tube manufactured by various factories.
2.Cutting type or Sculpting type: The cutting type has a good power stability and strong adaptability; while the sculpting type has a quick response speed and good engraving effect. It can prolong laser tube’s service life.
3.Easy Control: The start and stop of laser can be easily controlled by TTL level.
4.The power supply has output open circuit protection.
5.This power supply has TTL signal indication, water Through signal indication and laser output indicati
Main Technical Parameters:
AC Input Voltage AC220V or AC110V
DC Input Voltage
DC300V or DC150V
AC Input Frequency
47~440Hz
Voltage Output
50KV
Maximum Current
38mA (depending on the laser tubes of different manufacturers)
Efficiency
91%
Overcurrent Protection
130% of maximum current
Open Circuit Protection
Yes (short term)
Structure
Fan cooling
High Electric Level Control Voltage Range
≥3V
Low Electric Level Control Voltage Range
≤0.8V
Working Temperature
-30°C~+65°C
Relative Humidity
20~85%RH(no condensation)
Voltage Resistance
Input—Output
AC1500V1minutes≤10mA
Input—Shell
AC1500V1 minutes≤10mA
Output—Shell
Connection
Insulation Resistance
≥50MΩ(DC500V)
Earth Leakage Current
≤1mA(AC220V)≤0.5 mA(AC110V)
Vibration Resistance
Amplitude: 0.5mm frequency 10~55Hz3 dimensional direction 2 hours
MTBF
≥30,000hours
Test Time at Full Load and 60°C
12 hours
Power Supply Switch Test within 7 Seconds
500 times
Maximum Dimensions (LWH)
350mm220mm95mm
