Before rubber sheet bonding to roller, and the low friction coefficient between roller and belt, which easily cause slipping between them, and affect the belt load capacity, so when we bond rubber sheet to conveyor belt, it will enhance the friction coefficient and make sure highly efficiency running through the whole conveyor system.
However, when choose rubber sheet for pulley lagging, we should think twice, better choose easy bonding and high abrasion resistance rubber sheet, because the special requirement on pulley lagging rubber sheet, here we will suggest the Ramimtech Rubber sheet.
Ramimtech rubber sheet, which is the global high abrasion resistant rubber sheet for pulley lagging, whose self density can reach 1.10g/cm3, hardness can reach 60±5 ShoreA, abrasion ratio can reach 80mmAT 10N, strength elongation can reach 450%MIN, besides, whose backside contains CN semi-cured layer, when do pulley lagging, we should brush a coat of cold vulcanization glue sk313 on the CN layer, after cold vulcanization, rubber sheet and drum surface will be a whole.
Same working conditions Traditional rubber sheet Ramimtech rubber sheet
Bond to metal roller 7.1N/mm 14.3N/mm
Sulfuration Pressure 26kg/cm2 52kg/cm2
Abrasion ratio 42mm3AT 10N 82mm3AT 10N
Break strength 9MN/M2 20MN/M2
Break length 200%MIN 450%MIN
When both of rubber sheets running during the same working condition, Ramimtech rubber sheet has excellent abrasion ratio and unusual tenacity, for enterprises, choose Ramimtech rubber sheet, which not only enhance the conveyor system life time, but also enhance the business results.
