Introduction of Aluminum panels production line:
The aluminum panel production line is a type of specialized equipment for the production of laminated panels with the intermediate layer of polyurethane, anticorrosion or polyisocyanurate or phenolic plastic foam and with aluminum foil as top and bottom layers. The laminated panel is between 20 and 30 mm thick, 1200 mm wide, length determined by the customer. The panel is mainly used as a ventilation pipe for central air conditioners. Different insulating panels with other soft lining layers could also be produced on the line.
Aluminum panel production line
The operating principle of the aluminum panel production line is as follows: rigid foam plastic raw materials are delivered to the mixing head through the dosing pump in the injection machine and then injected into the bottom plate which goes to the conveyors together with the upper surface sheet. Between the upper and lower conveyors, the liquid materials harden in their shape, after which the laminated sheet is trimmed at the edge and, by means of an automatic tracking cutting mechanism, cut into segments according to the preset length.
The Aluminum Panels Production Line has already approved the identification of new and technological products carried out by the Economic and Commercial Commission of the Province of Jiangsu and the Department of Science and Technology of Jiangsu, being evaluated as one of the best in the first batch Products from Jiangsu Province (Product No.: 041111G0025N) and listed as a New Product Project at the National Level (Project No.: 2004ED690193).
Main technical parameters:
Specification of the panel produced l1200 mm × 20 ~ 30 mm (width × thickness), length on request
Linear production speed 2 ~ 5m / min
Maximum stamping speed 15 m / min
Stirring speed 4500 r / min
Alternative injection times per minute 60
Maximum hot air circulation temperature 70 ℃
Laminating the length of the rolling mill 18 m
Maximum space between conveyor belts 250 mm
Power of ToTel (KVA) 85 ~ 125
Overall external dimensions 40340 × 5365 × 3636 mm (Largo × Ancho × Alto)
External dimensions of the engraving machine unit 7050 × 3200 × 1600 mm (Length × Width × Height)
Weight ≈33 tons
