board sawing machine is the automatic processing equipment and without laser. It can saw-cut 18 mm die-board at one time and the kerf has the advantages of high precision, high verticality and high clamping force. During the processing have no black edge, no smoke and toxic gas.
This is machine is not only eco-friendly and high precision,but also very cost-saving and energy-saving.
It uses 9 Japan imported servo motors in total on this machine to control the movements and ensure the high cutting precision and accuracy.
The cutting head includes three parts:
- Saw cutting part is for straight line and curve line cutting
- Milling tool part is for bridging and edge milling
- Taper knife part is for lettering
Environment-friendly Die Board is much better than Laser-cutting Die Board
Ø Avoid the quality defects caused by laser cutting
Ø Improve the tightness and clamping of the kerf
Ø Control and adjust the kerf width precisely
Ø Ensure steady processing accuracy
Ø Solve the problem of bell-mouth Kerf and improve the verticality
Ø Reduce distortion of die board
Ø Solve the problem of laser trailing.
Ø Remove the black edge of die board
LOW COST
Ø The whole production cost is 1/5 of laser die board cutting machine.
Ø The electricity consumption is 1/10 of high-power laser cutting machine.
Ø Eco-friendly die board saw cutting machine only consists of CNC sawing machine and an air compressor.
Ø Saw blade is the only consumable item, which is cheap and easy to get replaced.
Ø Using normal plywood also can meet high production standards.
Ø No start biding time, you can run it anytime.
Machine Specification
Max wooden board size: L2.44mW1.22m
Max cutting area: L1.2mW1m
Overall working speed: 0.5~0.8m/min
Straight line cutting speed: 1.5m/min
Curve line cutting speed: 0.5m/min
Wooden board thickness: 16mm,18mm
Air pressure: 0.8mPa
Voltage requirement: 380V 3 phase
Cutting material: Wooden board, plastic board,Finland board, MDF board, PVC board,acrylic board
