1, Excellent mechanical properties: resistance to high impact strength, good toughness and the roller has no damage within 3 meters;
2, Good airtightness: waterproof, dustproof, and the bearing grease don’t leak;
3, Good corrosion resistance: acid, alkali, and salt corrosion resistance, two to three times better than traditional materials;
4, Widely suitable temperature range: can operate stably from 30 to 125 ℃;
5, Good antistatic property, and flame retarding;
6, Good wear resistance: low friction coefficient, wear-resisting performance is good, and it will not damage the belt, which can increase the service life of the belt 1-2 times;
7, Not sticky: smooth surface but not sticky;
8, Small running resistance: reasonable materials and structure design, dedicated bearing is used for roller; the rotating resistance is 1.2-1.5 N;
9, Low noise: under the same conditions, compared with other roller, the noise is down by 50%;
10, Light quality: the quality of our roller is 1/5 of the steel roller (roller cylinder, bearing pedestal) with easy installation and maintenance, as well as low labor intensity;
11, Energy-saving, environmental protection, high efficiency: when ACM rollers are equipped in conveyor, the motor power can be reduced; the comprehensive energy saving reaches more than 30%.
Main technical parameters:
1, Relative density 1.3g / cm3
2, Friction properties: dynamic friction coefficient 0.1~0.13
relative abrasion loss 22000h
