Characteristics and performance
Use of only certified materials at highest quality standards
Process of cell and module production is fully automated with 100% quality control and product traceability
Heavy load mechanical resistance: TuV certified (5400Pa tested against snow and 2400Pa test against wind)
Excellent performances even during low solar radiation
Guaranteed positive tolerance 0 to +3% of power for each module
Certifications for incentives
Quality, environment, health and safety
ISO 9001:2008, ISO 14001:2004, OHSAS18001:2007
Full member PV cycle association AISBL
Product Certifications
Quality and robustness: IEC61215:2005
Safety: IEC61730 -1/-2, MCS, CEC, UL
Resistance to salt corrosion (salt fog): IEC61701:2000
Resistance to ammonia fumes: ammonia resistance test
25 years linear power guarantee commercial
12 years on material and manufacturing defects
Performance
Power not less than 90% of power peak during the first 12 years
Power not less than 80% of power peak during the subsequent 13 years
Electrical characteristics at STC
Type: MSP285S MSP290S MSP295S MSP300S MSP305S MSP310S MSP315S MSP320S
Maximum power: P-max (W) 285W 290W 295W 300W 305W 310W 315W 320W
Tolerance value for power %: 0-+3%, 0-+3%, 0-+3%, 0-+3%, 0-+3%, 0-+3%, 0-+3%, 0-+3%
Maximum power voltage VMPP (V): 35.32/35.41/35.60/35.90/36.20/36.40/36.60/36.80
Maximum power current IMPP (A): 8.07/8.19/8.29/8.36/8.43/8.52/8.61/8.70
Open circuit voltage Voc(V): 44.8/44.8/44.8/44.90/44.92/44.94/44.96/45.02
Short circuit current Isc(A): 8.48/8.63/8.70/8.85/8.95/9.15/9.25/9.34
Module efficiency η: >14.68% >14.94% >15.20% >15.46% >15.72% >16.98% >16.24% >16.49%
Performance at STC: irradiance of 1000W/m² , module temperature: 77±3.6℉ (25±2℃)
AM 1.5 power measurement tolerance: ±3%
