Include Bucket Teeth, Adapters, End Bits, Cutting Edges, Locks, Pins and Washers used on Caterpillar,
Komatsu, Kobelco, Daeoo, Hyundai, Hitachi, JCB, Case, ESCO, CASE, Volvo,etc.
Type: Casting Parts
Material: Alloy Steel
Certification:ISO 9001:2000 QMS and ISO 14000 EMS.
Impact Value:16-20J
Hardness:46-52 HRC
Material T1 47-52HRC Hardness, V-Norch akv>=16J, Tensile>=1499Mpa, Elongation>=3% Yeild >=1040N/mm2
Material T2 48-52HRC Hardness, V-Norch akv>=20J, Tensile>=1500Mpa, Elongation>=4% Yeild >=1100N/mm2
Material T3 48-52HRC Hardness, V-Norch akv>=20J, Tensile>=1500Mpa, Elongation>=5% Yeild >=1100N/mm2
High hardness and wear-resisting.
