Cable rollers and cable pulling equipment for the DNO, cable laying contractor and electricity supply industry – this includes straight cable rollers, corner cable rollers, triple cable rollers and specialist cable rollers for pulling underground cables into trenches and ducts up to 33kV.
Cable rollers should always be used when pulling cables.
Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to prevent the cable being dragged on the trench bottom or in mud - cable roller spacing is dependent on cable type being laid and the cable pulling tension along the route. Leading cable rollers are used to support the cable over the entire drum width immediately before being pulled into the trench.
Cable laying applications with bends in the route require skid plates of a radius greater than the cables minimum dynamic bending radius.
Cable Rollers:For cables up to diameter 150mm.
Cat. No. Rated Load (kN) Construction Weight (kg)
CR0110 10 Cast aluminum frame, aluminum (nylon) roller 5.4/3.6
CR0111 10 Steel tubing frame, aluminum (nylon) roller 4.5/3.1
CR0112 10 Steel tubing, long legs, aluminum (nylon) roller 5.8/4.2
CR0113 10 Steel plate base, aluminum (nylon) roller 5.5/3.7
CR0114 10 Steel tubing frame, aluminum (nylon) roller 4.7/3.3
CR0115 10 Steel tubing frame, aluminum (nylon) roller 4.7/3.3
Corner Roller:Frames of corner rollers are linked together with stake pins to form a suitable bend to guide cables around the corner. (In the right pictures, three corner rollers are linked together)
Cat. No. Rated Load (kN) Max. Cable Dia. (mm) Weight (kg)
CR0116 10 150 11
CR0117 10 150 15
Manhole Rollers:Mounted on the verge of manhole to protect cables and pulling ropes.
Cat. No. Rated Load (kN) Weight (kg)
CR0118 10 10.8
Multi-Roller:Used to protect the cable when it enter or run out of a manhole. Easy to use.
Cat. No. Rated Load (kN) Weight (kg)
CR0120 10 10.8
Multi-Roller:Used to protect the cable when it enter or run out of a manhole. Easy to use.
Cat. No. Rated Load (kN) Weight (kg)
CR0125 80 3.3
CR0126 90 3.5
CR0127 100 3.8
CR0128 130 6
CR0129 150 7.2
