BRS Track Rollers
Track rollers, also called cam followers, are characterized by their thick-walled outer rings that run directly on a track. The thick outer rings permit high load-carrying capability while minimizing both distortion and bending stresses. Sealed designs with internal thrust washers help extend service life under conditions of infrequent lubrication.
Sizes: 16 mm - 110 mm (1/2 in. - 4 in.) bore.
Designs:
- Straddle mounting in a yoke with an inner ring.
- Cantilever mounting with an integral stud.
Benefits: High load-carrying capability with minimized distortion and bending stresses.
Extended service life under conditions of infrequent relubrication.
NUKR 72 X Specifications:
D: 72 mm
d: 24 mm
C: 28 mm
B: 80 mm
B1: 49.5 mm
B2: 11.0 mm
C1: 1.3 mm
D2: 44 mm
Technical parameters:
Cr: 44.5kN
Cor: 60.0kN
Fr: 32.0kN
For: 60.0kN
Limiting speed: 2100 rmp
Nut tightening torque: 220 Nm
Application:
Cutting machine, weaving machines, stretch sewing machine, package edge machine, Ram support rollers, embroidery machine, button sewing machine, bag opening machine, thick feeder, high truck, material handling and indexing equipment.
