INTRODUCTION
this product is a specific control module. It allows to manage 2 serial ports by RS485 or not Ethernet network. Each port can be configured in RS232, RS422 or RS485. It can also serve as Mediabus/Ethernet gateway. The unit can be powered by an external power supply or ethernet network directly if it meets the 802.3af standard.
TECHNICAL specifications
Ethernet Interface: 10 Base T
Cable: CAT 5
Protocol: UDP
Port: 12000 and 10022 (default)
connector: RJ45
Serial Interface: RS485
speed: 115200 baud rate
communication parameters: 8 data bits per character, 1 stop bit, no parity
connector RS485: MC1.5/3-G-3.81 (manufacturer: Phoenix Contact)
number of serial ports : 2
mode available: RS232, RS422, RS485
port speed 1: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600 baud
speed port 2: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 baud
parity: even, odd, no
number of bits per character: 5, 6, 7, 8
number of stop bits: 1, 1.5, 2
Mode RS232 : Control of stream by RTS and CTS
connectors: SubD9 female
DIMENSIONS and weight
Dimensions (W x H x D): 126 x 85 x 31 mm
weight: 420 g
