Film Faced Plywood:
Glue
WBP/MLM/MR
Size
1220*2440
1250*2500
As Inquiry
Brand
ACME
Thickness
4.0 to 40mm
Core
Poplar/combi/hardwood
Face/Back
Brown/Black/Red
Grade
A/AA/AAA
Origin
Pizhou China
Description
The clients can avail from us high grade Poplar Hardwood Birchcore two times press Film Faced Plywood .The Poplar Hardwood Brich Film Faced Plywood we offer is appreciated widely for its excellent properties and is suitable for use in varied construction applications. The Film Faced Plywood that we offer is coated with high quality film that ensures its hardness and damage resistance.
-
If put in boiling water for 48 hours, it is still glue-sticking and non-deformed
-
Physical mood is better than iron moulds and can satisfy the requirements of constructing mould, while the iron ones are easy to be deformed and can hardly recover its smoothness even after repairing
-
If used abide by the illustrations strictly, it can be reused more than 50 times, thus reducing the cost greatly and avoiding the disadvantages from ( rustily and erosive of iron mould)
-
Solves the problems of leaking and rough surface during constructing process
-
Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat
-
Realizing a higher economic profits.
Characteristics
-Easy to manipulate
-Easy to work using commom tools
-Stability and high mechanical resisitance to bending , traction and compression
-Very good weight/rigidity ratio
-Reduce the porosity of the faces and give an excellent face finish to the formwork
-More resistance to moisture in formwork applications
Recommendantions
Point 1.
Seal the edges with waterproof paint in case the boards are cut on side.
Point 2.
Use damp clolths and wooden or plastic spatula to protect it from damage.
Point 3.
Clean and apply oil immediately before and after use.
Point 4.
Seal with synthetic waterproof paste.
Point 5.
Store in back-to-floor packages outsides of direct sunlight and rain.
