The machine has a horizontal base moving column in T with double guides on which are travelling the boring and milling headstocks. The beds are independent structures of each other (table and column) placement in T on which the table longitudinal movement and the column has the transversal one. Technical data are specified in the following:
- X=2.000 mm (longitudinal travel of table);
- B=1.600x1.800 mm_15 T_360.000 div./rot (rotary displaceable table);
- Y=2.000 mm (vertical travel of saddle);
- Z=1.000 mm (transversal travel of column);
- W=700 mm (travel of milling spindle);
- U=400 mm (transversal travel of RAM);
- V=1.500 mm (transversal travel of gundrill for deep drilling);
- A=±35° (tilting of gundrill drilling unit).
GUNDRILL DRILLING UNIT:
- Drilling GUNDRILL diameter MIN / MAX= 6 / 40 mm;
- GUNDRILL spindle taper= ISO-50 DIN-69871;
- Spindle rotation speed=4.000 rot/min;
- Spindle power (S1)= 17 Kw;
MILLING SPINDLE ISO 50:
-
Travel of W axis= 700 mm;
-
Spindle taper= ISO 50 DIN 69871;
-
Spindle speed= 2.500 rot/min;
-
Spindle power (S1)= 22 Kw;
-
Boring and milling quill diameter= Ø130 mm;
-
the cooling system has two outputs: one of external spindle and one of internal spindle. The cooling of the milling tool is realized through air blow;
-
Heidenhain linear scales;
-
Chip conveyors;
-
Full enclosure.