The Digital Thermostat Module (DTM) display and provide space temperature, setpoint and fan mode/speed display for the LonWorks Fan Coil Terminal Unit Controller.Using the Touch-Screen interface, the user can change room temperature setpoint, fan mode/speed.This wall module is compatible with Fan Coil Terminal Unit Controller.
Specifications:
Model : Digital Thermostat Module
Memory : 12Kbytes ROM,2Kbytes RAM
Power supply : 30mA(DC) @ 24V(DC)
Power consumption : 10~20mA
Connection : Plug-screw clamp 0.2-2.5mm
Temperature : Operation 0 ~ +40°C
Storage -20 ~ +60°C
Admitted relative humidity : 5 ~ 90%, non condensing
Dimensions : W154.6mm X H102mm X D32mm
Mounting : Wall mount
Display & Operation : Service and Reset LED indicator and button
I/O Channels : one dry contact input channel
Set point Adjustment Range :
Fahrenheit : 53.6 to 86°F Centigrade : 12 to 30°C
Set point Display Resolution :
Fahrenheit : 1°F Centigrade : 0.5 °C
Temperature Display Resolution :
Fahrenheit : 0.1°F Centigrade :0.1°C
Features:
˙Full compatible to all current standard Fan Coil Terminal Unit Controller.
˙Low power consumption
˙LCD display continuously show current space temperature, fan status/mode as configured.
˙Touch-screen interface for full navigation and change control of wall module functions.
˙Touch screen interface for Setpoint adjustment.
˙Integral NTC sensor.
˙Fan Speed/Mode commendable for touch screen(*).
˙Selectable °F /°C temperature display.
˙Separate mounting base for easy installation.