Earth Anchors / Ground Anchors are installed at a slant, inline with the attached wire and perpendicular to the end post. This way the helix plate can catch. If it is too difficult to turn the anchor into the ground, a hole is dug to a depth of approximately 1/2 the length of the anchor. Then turn the anchor into the ground by hand, using a rod, crow bar, or length of pipe for leverage. After the earth anchor is installed full depth, earth is repacked, six inches at a time.
Product Description
Material: Carbon steel, stainless steel
Process: Stamping and welding
Features:
1) Very high production rate
2) Excellent dimensional accuracy
3) Very low piece price
4) Excellent repeatability
5) We can supply series of aluminum alloy die-casting products
6) We can provide fabrication, deep drawing, machining, welding and assembly
This anchor series used for fix equipment in the construction work. We supply welded anchors, OT anchor in high quality.
We have five factories for casting, forging, stamping, machining and welding parts with more than 20 years experience. 90% of our products were exported to Germany, Japan, USA, Italy, Sweden etc.
Produce according to your drawings or samples.
Welcome to our factories for visiting and discussing.
Good price, good service and good quality.
