- Common electric detonator
Applicable scope: Used in blasting workplace without mashgas and coal dust. It can reliably initiate various explosives. By designing the blasting network, it can achieve directional, pinpoint blasting and micro differential blasting etc. It is widely used in blasting projects of mining, tunnels digging, roads building, bridges and water conversancy works constructing etc. - Electric Detonator in COAL Mine
Applicable scope: Mainly applied in blasting workplaces with explosion risk of mashgas, coal dust and other combustible mineral dust. Millisecond series can achieve micro differential blasting, effectively reduce seismic wave effect, decrease secondary crushing quantity, and improve blasting efficiency. It also can be used for various blasting projects of mining, tunnels digging, roads building, bridges and water conversancy works constructing etc.. - Technical Index
Specification: Industrial No.8
Shell outer diameter: Φ6.9mm
Shell：Flange
Shell length：50~70mm
Leg wire: Galvanized steel, copper, copper clad steel
Leg wire length: 2m~50m
Igniter element: Elastic fuse head, rigid fuse head
Variety: Common electric detonator, permissible electric detonator - Performance
Resistance: Galvanized steel core Leg-wire ≤6.3Ω, with vibration ≤2.0Ω
Safety current: Charging with 0.2A constant direct current for 5mins, no explosion
Minimum firing current: ≤0.45A
Firing impulse: 2.0～7.9A2·ms
Series firing current: 20 pieces electric detonators are connected into series circuit, and charge with 1.2A electric current, and all detonators fire.
Initiating Power: Have a lead plate test, piercing into 5mm lead plate, the hole diameter should no smaller than the out-diameter of the detonator
Tensile: Force on 19.6N static tension for 1 min, no damage to sealing plug and leg-wire.
Anti-jolt property: Vibrate for 10min on the jolt machine, no explosion, structure damage, short circuit, open circuit and unstable performance occurs.
Anti-static: Legwire to shell discharge with 8kv voltage, 2000pf capacitance and 0Ω series resistor, no firing.
Combustible gas safety degree: When initiating a permissible electric detonator in the combustible gas of 9%, the combustible gas should not be ignited.
Item Performance
Resistance Galvanized steel core Leg-wire ≤6.3Ω, with vibration ≤2.0Ω
Safety current Charging with 0.2A constant direct current for 5mins, no explosion
Minimum firing current ≤0.45A
Firing impulse 2.0～7.9A2·ms
Series firing current 20 pieces electric detonators are connected into series circuit, and charge with 1.2A electric current, and all detonators fire.
Initiating Power Have a lead plate test, piercing into 5mm lead plate, the hole diameter should no smaller than the out-diameter of the detonator
Tensile Force on 19.6N static tension for 1 min, no damage to sealing plug and leg-wire.
Anti-jolt property Vibrate for 10min on the jolt
