Product name: Electrical Metallic Tubing (EMT)
Standard: UL797/ANSI C80.3.
Size: 1/2", 3/4”, 1”, 1-1/4”, 1-1/2”, 2”, 2-1/2”, 3”, 3-1/2”, 4".
Material: steel.
Surface: Hot-dip galvanized(HDG) or Pre- galvanized(PG).
UL listed NO. For HDG EMT pipe: E314491.
Electrical Metallic Tubing (EMT) is unthreaded, circular cross-section. It always used for protecting wires and cables. It is easy to cut and easy to bend - reducing waste and installation time. Metal conduit is non-combustible and easily adaptable to future wiring changes.
Size(ODxTHICKxLENGTH):
1/2" 0.076"x0.042"x10' 17.93mm x 1.07mm x 3050mm
3/4" 0.922"x0.049"x10' 23.42mm x 1.24mm x 3050mm
1" 1.163"x0.057"x10' 29.54mm x 1.45mm x 3050mm
1-1/4" 1.510"x0.065"x10' 38.35mm x 1.65mm x 3050mm
1-1/2" 1.710"x0.065"x10' 44.20mm x 1.65mm x 3050mm
2" 2.197"x0.065"x10' 55.80mm x 1.65mm x 3050mm
Notes: Applicable tolerance
Length: 10FT ±1/4in. 3050mm ±6.35mm.
Outside Diameter: 1/2" to 2" ±0.005in.(16mm to 53mm ±0.13mm).
2-1/2" ±0.010in. (63mm ±0.25mm).
3" ±0.015in. (78 ±0.38mm).
3-1/2" to 4" ±0.020in. (91mm to 103mm ±0.51mm)