Features
Core to core alignment by PAS technology
( PAS:Profile Alignment System)
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display
USB & VGA interface
Software upgrade via USB interface
Specefications
Model KL-300T
Applicable fibers SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length 8~16mm（Coating diameter：250µm）
16mm（Coating diameter: 250 ~ 1000µm）
Fiber diameter Cladding diameter：80 ~150µm
Coating diameter：100~ 1000μm
Fiber Count Single
Fiber aligning method Core or clad aligning
Image processing method Digital
Actual average splice loss 0.02dB （SM）, 0.01dB (MM),
0.04dB (DS), 0.04dB( NZDS)
Splicing time Typical 9 sec，with standard SM fiber
Splicing mode 53(templet), 40(user)
Splice loss estimate More accurate
Return loss ＞60dB
Storage of splice result 4000 results，20 parameter per result
Fiber display and magnification 300X（X or Y view）,150X（X and Y view）
Tube heating time Typical 30 sec
Tube heating mode 9(templet), 24(user)
Tube heating temperature Can be adjusted
Applicable Protection sleeve length 60mm, 40mm and a series of micro sleeves
Tension test 2N
Electrode life 2500
No.of splice/heating with battery Typical 150 cycles (splice/tube heat) with inner Li-battery
Display screen 5.6 TFT inch color LCD monitor
Image change over The fiber image is turned upside down
Terminals USB 1.1 and VGA
Operating condition 0 ~ 5000m above sea level, 0 ~ 95%RH and -10～50℃, respectively, Max. wind velocity of 15m/s
Power supply AC 100-240V with AC adapter; inner Li-battery(6600mAH)
Dimensions 150mm(L) x150mm (W) x150mm (H)
Weight 2.7 Kg excluding battery,3.2 Kg including battery
