LAB THINK allow VAC - V3 permeability Tester is used to measure the transmission of gas, the coefficient of solubility, diffusion and permeability of plastic sheets, laminated sheets, materials to high barrier.
Technical characteristics:
Measuring range: normal 0.1~50,000cm3/m2•24h•0.1Mpa(volume)
Maximum: 1.00 ~ 500, 000 cm3 / m2•24h•0.1Mpa (volume of extension of Group A)
0.01 ~ 1, 000 cm3 / m2•24h•0.1Mpa (Group B)
PS: Selection of volume carried out by software
Range of temperature control: temperature 5 ° C ~ 95 ° C
Vacuum in the test chamber level: less than 20Pa
Sample Diam.97mm size,
Measured area: 38.48 cm2 (70mm diameters)
Quantity of samples: 6
The test gases: O2, N2, CO2 etc. (clients bring their own gas source)
Test pressure:-0.1Mpa ~ +.1MPa
Gas source pressure: 0.4mpa ~ + 0.6mpa
Cap size: Diam.6mm pipe polyurethane
Dimension: 1370mm (L) × 575mm (L) × 450mm (H)
Power supply: AC 220V, 50 Hz
Net weight: 160kg