Our customized type 1xN (≤16) MEMS optical switches connect optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent pending MEMS configuration and activated via an electrical control signal.
Application
·DWDM networks
·Channel Monitor
·R&D in Laboratory
·Configurable OADM
Features
·Base on MEMS technology
·Small package
·High Stability, High Reliability
·Epoxy-free on Optical Path
·Non-latching
Specifications
Parameters Unit SUN-FSW-MEMS-1×N(≤16)
Wavelength Range nm SM MM
1260~1650 850±20
or 1310±20
or 1550±20
Test Wavelength nm 1310/1550 850/1310/1550
Insertion Loss dB 0.6(TYP) 0.8(MAX) N≤8
1.0（TYP） 1.6(MAX) N≤16 0.8（TYP） 1.0(MAX)
N≤8
1.0（TYP） 1.5（MAX）
N≤12
WDL dB ≤0.3 ≤0.3
PDL dB ≤0.15 ≤0.15
Return Loss dB ≥40 ≥25
Crosstalk dB ≥50 ≥30
Repeatability dB ≤±0.05 ≤±0.05
Power Supply V 5~12
Durability Cycles ≥109
Switch Time ms ≤20
Transmission Power mW ≤500
Operating Temperature ℃ -5~+70
Storage Temperature ℃ -40~+85
Dimension mm
S1:(Type A) 39.1 x 24.7 x 11 ±0.2
S1:(Type B) 65 x 24.7 x 11 ±0.2
S2:(Type A) 90 x 50 x 12 ±0.2
Note:
1 Within operating temperature and SOP，MM CPR＞16.
2 Excluding connectors.
3 Power off isolation same as cross-talk.
4 WDL is specified in a ±20 nm of 1550nm,at 23°C.
5 Repeatability is defined after 100 cycles.
