Type: Extruded Graphite Rod
Place of Origin: China (Mainland)
Samll order: Accept
Certificate: ISO9001:2008
Applications
These graphite rods are widely used as electrodes, anodes, cathodes, heating elements, resistors, fluxing/degassing tubes, molds, crucibles, special structural parts, etc. in metallurgy, mechanical engineering, chemical & electrochemical industry, energy management, glass & ceramics, transportation and other industries.
Programmable properties
Medium and/or fine grain
High density and high mechanical strength
High thermal and chemical resistance
High resistance to thermal shock
Proper electrical conductivity
Minimum wettability to molten metals and glass
Typical Sizes
Fine-grained Graphite Rod (Blank Size): Nominal Diameter(mm): 43 一 110
Length(mm): 600 — 1800
Medium-grained Graphite Rod (Machined Size): Nominal Diameter(mm): 75 一 450
Length(mm): 1700 — 2100
- Other diameters and lengths are available on request.
Specifications(Fine-grained Graphite Rod=FER, Medium-grained Graphite=MER)
FER-E1:
Bulk Density: 1.58 – 1.62 g/cm3
Compressive Strength: 18 – 24 MPa
Bending Strength: 8 – 11 MPa
Specific Resistance: 8.0 – 15.0μ Ω•m
Ash: 0.05 – 0.3%
Maximum Grain Size: 0.2mm
FER-E2:
Bulk Density: 1.67 – 1.72 g/cm3
Compressive Strength: 28 – 40 MPa
Bending Strength: 14 – 22 MPa
Specific Resistance: 7.0 – 15.0μ Ω•m
Ash: 0.05 – 0.5%
Maximum Grain Size: 0.2mm
FER-E3:
Bulk Density: 1.74 – 1.78 g/cm3
Compressive Strength: 44 – 52 MPa
Bending Strength: 22 – 28 MPa
Specific Resistance: 7.0 – 15.0μ Ω•m
Ash: 0.05 – 0.3%
Maximum Grain Size: 0.2mm
MER:
Bulk Density: 1.67 – 1.71 g/cm3
Compressive Strength: 24 – 38 MPa
Bending Strength: 12 – 20 MPa
Specific Resistance: 7.0 – 10.0μ Ω•m
Ash: 0.05 – 0.3%
Maximum Grain Size: 0.8mm