adopts SMS data transmission and voice platform of GSM network to send control command and receive alarm remotely. The system can be set delayed-arm. When a signal is detected by detectors, the detectors will send alarm signal to host immediately, then the host sends alarm SMS to its pre-set mobile phone numbers, and meanwhile dials its pre-set telephone/mobile phone numbers automatically and drive wiretap. In addition, users can dial the system and set it in arm/disarm mode by any remote phones.
Following are the specific functions
Adopt wavecome double frequency GSM module.
1.With color LCD show screen and keyboard on the host.
- 11 wireless guarding zones (1 wireless SOS zone, 1 fire alarm zone, 1 external power failure alarm zone , and other 8 wireless guarding zones can be defined by user ).
3.Send SMS to 3 pre-set mobile phone numbers automatically while alarming.
4.Call 3 pre-set phone numbers automatically and monitor at site while alarming.
5.Set the time of arm/partial arm/disarm.
6.Arm/disarm by the keyboard on the host, remote controller or SMS. - Program the alarm host by keyboard or SMS.
- Modify the name of 8 wireless guarding zones and inquire the status of host by SMS demand.
- Define the 8 wireless guarding zones as arm/partial arm by keyboard on the host.
- With standby rechargeable battery
- The host automatically stores system status, while its power is off.
12.Connect with the alarm center through GSM network
